Gate Valves are designed with a sliding disc or gate which is moved by the actuator perpendicular to the direction of flow. There are many variations in seat, stem and bonnet design in gate valves. They are available in a wide assortment of sizes and weights.
Gate Valves are used primarily as stop valves, i.e., fully open or fully closed. They are not normally considered for throttling purpose. They are suited for high pressure and high temperature use with a wide variety of fluids. They are not usually used for the slurries, viscous fluids etc.
Gate Valves usually have a low pressure drop when fully open, provide a tight seal when fully closed, and are relatively free of contamination build up. Castings are bronze or cast steel and flange dimensioins are Table D.
Gate and Globe valves are sourced from GG Valves in Udaipur, Rajasthan, India and stocked in Sydney.
